This picture is an example of the Whipstock Tools that we custom make. We have several different sizes and styles of whipstocks for different well situations. This type of tool in conjunction with our Downhole Video, allows us to get lined up with the lower section of the parted casing in the well. With the whipstock face oriented towards the lower section of the parted casing, we can then RIH with Coil Tubing and a Mud Motor BHA. Then attempt to get milled back into the lower casing, and gain access of the lower section of the well, thus allowing us to properly abandon the lower sections and achieve proper isolation of the zones below the damage. It is not an uncommon practice for us to pump cement through our motors to P&A zones below the damage in a well. It often takes the aggressive rotation of a mud motor to get past damaged spots within a wellbore and reach an acceptable depth for CalGem.